Clamping elements
Clamps for assembly technology have to meet different requirements than, for example, clamps for machining. Priority is given to safe clamping; it is essential to prevent the workpiece from falling out.
Therefore, the capabilities of status indication / clamping sensing and self-locking are of particular importance.
Different drive energies can be used:
Manual, pneumatic; electric; hydraulic.
Due to the setup with a crane or by hand, pre-positioning and active retraction of the tensioner can be very important. From an ergonomic point of view, the tensioner should not form a shearing edge.
Single-acting, pneumatic
The STARK.easyclick is a mechanical quick-release fastener that clicks and holds immediately without energy supply.
To release it, it only needs an air connection with 4 - 8 bar pressure.
85 mm diameter and only 19 mm high
5 kN clamping force - 10 kN holding force
Release time 0.1 sec
Focus: Vertical arrangement;
Secure holding of workpieces on flat surfaces
with self-locking
max. clamping force 7.5 kN
max. clamping stroke 6 mm
Focus: Applications with workpieces with clamping lugs and optional turning in the application.
Due to the high clamping force and self-locking, the workpieces are also held securely during turning (device with corresponding design and safety consideration necessary).
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Welcome back! Log in to your already existing user account.